Looking for:
Acronis disk director key 12 free
It is my understanding that Microsoft does not have core isolation and memory integrity as a default settings which most users would be unaware of. Instead I rely on the obvious included tools when I install software and decide to uninstall again: either Windows’ Uninstall, or Windows’ System Restore, or if those fail to work of course there is ATI Recover from backups which I do every morning.
It’s a sandbox. Lets say you go to an unscrupulous web site or install a questionable program. If everything is OK, you apply the changes. If there is a virus or you want to remove your history, you reboot to bring your system back to before you tried those questionable activities. This is MUCH faster than a full backup recovery. I have used it a lot. There are plenty of other versions available. One of the free ones I’ve tried is Sandboxie. It will keep your web activity in a bubble, so that any activity the web activity creates is in a virtual sandbox.
TY for that pl1. It has been years since I’ve used a sandbox. Another option here is to use a virtual machine for testing! Well I tried it. NET, my VPN would not launch properly thus no Internet, got another error and finally when things settled down I tried to Reboot again and the machine wouldn’t–became unresponsive and so I have to power-down.
When it restarted, one of my critical programs is not working right. I may have to do a full Restore. I’ve been using it for most ATI editions successfully throughout the years. There was one version that would not work, if I recall. Not your fault.
I decided to try it and yes it went horribly wrong, but now after several hours of fiddling I have got my PC mostly back. And that upon reboot, the RAMdisk was gone, and that was the cause for all the program errors. Years ago I had a Comodo system installed and it too had a sandbox and I never quite got the hang of using it.
Ok, glad you are back! I’ve never tried using a RAMdisk. Shows how valuable a good backup is! It’s covered my butt more than a few times. I renamed tib. Core isolation now works. The functions that I use in Acronis True Image appear to work. If I develop any problems with my Acronis functions I will report back here. At this point everything appears to be working normally. It may also be that it is inextricably intertwined with other important functionality. Same problem here with tib.
Will try renaming. You can activate Acronis True Image either on your computer or from another computer, if your computer is not connected to the Internet. If you have an upgrade serial number, Acronis True Image will prompt you to enter serial number for earlier version of the product in the second field:. If your computer is connected to the Internet, the product will be activated automatically when you sign in to your Acronis account.
If your serial number is not registered yet, you will be prompted to enter the serial number manually. Click Enter serial number , type in or paste the serial number, and click Activate. If the license cannot be activated online for any reason, follow instructions below to activate the license using the offline method:. The program will generate an installation code. Disk Director. Buy now. Try now. Disk cloning. Easily migrate your data, operating system and applications from an old disk to a new replacement disk.
Volume recovery. Quickly recover lost or deleted data partitions, even in cases when your operating system fails to boot. Partition management. Take control of your data, drives and system. Manipulate Manage your data, whether you are splitting, resizing, converting or merging volumes.
Create, convert and copy files and volumes as needed. If you do not have one yet, click Sign Up to create it. Owners of subscription and PPI licenses also get support by phone for technical issues. Providing us recovery log, system report, step-by-step screen photos and the list of the undertaken steps would allow for quicker issue resolution.
Skip to main content. Last update: Introduction This article instructs how to use Acronis True Image to recover Windows from a boot failure. Pre-requisites 1. A previously created backup. Solution Insert Acronis Bootable Media Reboot the computer If at this point the computer boots into Acronis Bootable Media environment, then click here to skip to the part of configuring the recovery task.
On Windows 8 or Windows 10 machine, if Secure Boot is enabled then bootable media may fail to load or may be absent in the list of boot devices. Disable Secure Boot temporarily to perform recovery. Use either of these three methods to browse to the backup location: 1 expand «Computers Near Me» section on the left panel and browse to the folder with the backup 2 click in the «File name» field and type two backward slashes, followed by the NAS’ name or IP-address, followed by another backward slash, e.
After you type the last backward slash, wait for the program to connect to the NAS, enter credentials if asked, and browse to the folder with the backup 3 NAS may or may not be discovered automatically as a «NAS» device, depending on the NAS make, its settings and router configuration.
If you are restoring from Acronis Cloud, click «Acronis Cloud», enter your Acronis account credentials and click Sign in: Click on the backup name, then click OK: If the backup is encrypted for extra protection, type in the encryption password and click OK: Click Next:.
Days when at least one backup version was created will be marked in green: Click on the latest day marked in green: Click on the backup creation time on the right side. If there are several items in the list, choose the latest: Click Next:. Click on the disk where the system currently resides, but fails to boot, and click Next: Click OK to confirm that everything on the selected disk will be deleted and replaced with the previous state of the system disk from the backup:.
If it was not possible to change recovery mode from partitions mode to disks, there are two possible outcomes: 1 the «Next» button is not grayed out: When recovering to the original disk with unchanged internal disks order and partition structure, the program will be able to map partitions from the backup to existing partitions on the original disk automatically. The «Next» button is grayed out, when either internal disks order or partition structure has changed and the software was unable to automatically find the original partition: Click «New location»: Locate the original disk on the list and click on its first partition: Click Accept: Click Next to move the second partition’s settings: Click New location, this time to set the destination for the second partition: Select the second partition under the system disk: Click Accept: Click Next:.
Click on «Properties»: Look at the value of «Partition scheme» parameter. Acronis True Image: how to restore the system to the original disk from within running Windows. How to apply an existing protection plan? How to run a protection plan manually?
How to configure a backup to Cloud? For a backup to Cloud, an active Cloud Storage subscription is required. Create a new protection plan see section How to create a protection plan above and choose «Cloud Storage» as a destination in the field «Where to back up».
Find more information on how to browse the cloud storage, view the contents of the backups, and download needed files here. Create a new backup plan and specify the desired location in the field «Where to back up».
How to create a backup to Acronis Secure Zone? Secure Zone is a secure partition on a disk of the backed-up machine. This partition has to be created manually prior to configuring a backup. For information about how to create Secure Zone, its advantages and limitations, refer to this page. Once a Secure Zone is created, create a new protection plan and specify Acronis Secure Zone as a destination in the field «Where to back up».
The backup plans can be transferred from Acronis Cyber Backup Refer to this article for detailed instructions. If during the upgrade a backup plan did not migrate automatically, recreate the plan and point it to the old backup file. If only one machine is selected for backup, click Browse , and then select the required backup.
If multiple machines are selected for backup, re-create the old backup file name. What backup schemes are available in Acronis Cyber Protect 15? Please refer to this page for more information about scheduling options. How to modify the backup scheme in the existing protection plan? Edit the protection plan and select a new backup scheme. Note that some schemes may be unavailable depending on the selected backup source and backup location.
Refer to this p age for more information about available backup schemes. What retention options are available? You can choose one of the following options to specify how long to keep backups created by the backup plan:. Refer to this page for detailed instructions on how to apply the retention rules. For additional protection of the application data, enable Application backup in the parameters of the backup plan:. Application-aware disk-level backup is available for physical machines, ESXi virtual machines and Hyper-V virtual machines.
On a virtual machine, no agent installation is required; it is presumed that the machine is backed up by Agent for VMware Windows or by Agent for Hyper-V. Refer to this page for more information about application-aware backup. What rights are required for an application-aware backup? The account must be a member of the Backup Operators or Administrators group on the machine, and a member of the sysadmin role on each of the instances that you are going to back up.
Exchange The account must be a member of the Administrators group on the machine, and a member of the Exchange Organization Administrators role group. Exchange and later: The account must be a member of the Administrators group on the machine, and a member of the Organization Management role group. Refer to this page for more information. Is it possible to set my own naming for archives? I would like to send my data on a disk instead of uploading it.
Is it possible? Are SQL databases accessible during backup? How to create a bootable media? You can also create bootable media by using Bootable Media Builder. Please refer to this page for more detailed instructions. How to download bootable media? To download bootable media ISO from Cyber Protection console, click on «account» icon in the top right corner and select Downloads from the menu.
In Downloads window, scroll down to the Tools section and click Bootable media.
Acronis disk director key 12 free.65658: Acronis Cyber Protect 15: FAQ
If that happens, just let the required operations complete and after one or several reboots the system should be back to normal. Click «Resolve problem» button under Account tab, select «I have changed hardware Click here for more information. If the system disk failed and you had to replace it with a new one, installed software and Windows may or may not ask for their licenses reactivation after the recovery.
It they do, that is due to a significant hardware change detected and cannot be and should not be prevented or avoided by Acronis software. Contact the respective third-party software vendors or Microsoft for help with license reactivation. Power off the computer, physically disconnect the power cord if it is a desktop , open the case and unplug the system disk. If this does not help – keep disconnecting other devices all USB devices, SD cards, network cable etc one-by-one until you find the culprit.
The failing device then may need repair or replacement. If you do not have one yet, click Sign Up to create it. Owners of subscription and PPI licenses also get support by phone for technical issues. Providing us recovery log, system report, step-by-step screen photos and the list of the undertaken steps would allow for quicker issue resolution.
Skip to main content. Last update: Introduction This article instructs how to use Acronis True Image to recover Windows from a boot failure. Pre-requisites 1. A previously created backup. Solution Insert Acronis Bootable Media Reboot the computer If at this point the computer boots into Acronis Bootable Media environment, then click here to skip to the part of configuring the recovery task.
On Windows 8 or Windows 10 machine, if Secure Boot is enabled then bootable media may fail to load or may be absent in the list of boot devices. Disable Secure Boot temporarily to perform recovery. Use either of these three methods to browse to the backup location: 1 expand «Computers Near Me» section on the left panel and browse to the folder with the backup 2 click in the «File name» field and type two backward slashes, followed by the NAS’ name or IP-address, followed by another backward slash, e.
After you type the last backward slash, wait for the program to connect to the NAS, enter credentials if asked, and browse to the folder with the backup 3 NAS may or may not be discovered automatically as a «NAS» device, depending on the NAS make, its settings and router configuration. If you are restoring from Acronis Cloud, click «Acronis Cloud», enter your Acronis account credentials and click Sign in: Click on the backup name, then click OK: If the backup is encrypted for extra protection, type in the encryption password and click OK: Click Next:.
Days when at least one backup version was created will be marked in green: Click on the latest day marked in green: Click on the backup creation time on the right side. If there are several items in the list, choose the latest: Click Next:. Click on the disk where the system currently resides, but fails to boot, and click Next: Click OK to confirm that everything on the selected disk will be deleted and replaced with the previous state of the system disk from the backup:.
If it was not possible to change recovery mode from partitions mode to disks, there are two possible outcomes: 1 the «Next» button is not grayed out: When recovering to the original disk with unchanged internal disks order and partition structure, the program will be able to map partitions from the backup to existing partitions on the original disk automatically.
The «Next» button is grayed out, when either internal disks order or partition structure has changed and the software was unable to automatically find the original partition: Click «New location»: Locate the original disk on the list and click on its first partition: Click Accept: Click Next to move the second partition’s settings: Click New location, this time to set the destination for the second partition: Select the second partition under the system disk: Click Accept: Click Next:. Click on «Properties»: Look at the value of «Partition scheme» parameter.
Acronis True Image: how to restore the system to the original disk from within running Windows. How to create bootable media. Switching from partitions to entire disk recovery mode. Only 2 TB of space are available on a disk larger than 2 TB after disk cloning or backup restoration.
Contacting Support and Providing Information. Was this article helpful? Without activation the fully functional product works for 30 days. If you do not activate it during that period, all the program functions become unavailable except the recovery. You can activate Acronis True Image either on your computer or from another computer, if your computer is not connected to the Internet. If you have an upgrade serial number, Acronis True Image will prompt you to enter serial number for earlier version of the product in the second field:.
If your computer is connected to the Internet, the product will be activated automatically when you sign in to your Acronis account.
If your serial number is not registered yet, you will be prompted to enter the serial number manually. Click Enter serial number , type in or paste the serial number, and click Activate. If the license cannot be activated online for any reason, follow instructions below to activate the license using the offline method:. The program will generate an installation code. It uniquely identifies the computer where Acronis True Image is installed and what license key was specified.
Save your installation code to a file by clicking the Save to file button, and specify a removable media as the file location for example, a USB flash drive. You can also write down this code on a piece of paper. How to apply Acronis Universal Restore? If the operating system does not boot after recovery , use the Universal Restore tool to update the drivers and modules that are critical for the operating system startup. You’ll find more detailed instructions here.
How to recover disks with a bootable media? For more detailed instructions, refer to this page. How to recover files from cloud storage? To download files from the cloud storage, follow the detailed instructions on this page. Can I recover individual email messages from an Exchange backup? Yes, granular recovery can be performed to Microsoft Exchange Server and later.
The source backup may contain databases of any supported Exchange version. For more information refer to this page. Can I recover a backup of a physical machine as a virtual one?
Yes, physical-to-virtual migration is available in Acronis Cyber Protect To perform the P2V recovery, follow instructions on this page. No, this option is not available in this version. It is planned for future releases. Check this page to find solutions for popular technical issues: Acronis Cyber Protect 15 known solutions. The following articles will help you to localize, troubleshoot and resolve technical issues effectively:.
Acronis Cyber Backup Acronis Software: Troubleshooting Application Crashes. Acronis Software: Troubleshooting Application Lockups. Skip to main content. Applies to: Acronis Cyber Protect Last update: Acronis Cyber Protect 15 is a solution that integrates backup, disaster recovery, AI-based protection against malware and ransomware, remote desktop, and security tools in a single agent Based on Acronis Hybrid Cloud Architecture, it allows you to protect all the data, whether it is located on-premises, in remote systems, in private and public clouds, or on mobile devices.
Watch this video for an overview of the product:. The cybersecurity features are supported on the following operating systems: Windows: Windows 7 and later, Windows Server R2 and later.
Windows Defender Antivirus management is supported on Windows 8. Linux: CentOS 7. Other Linux distributions and versions might also support the Cyber Protect features, but have not been tested.
The Cyber Protect features are only supported for machines on which a protection agent is installed. This feature is available in Standard and Advanced edition. Please refer to this page for detailed instructions. To revoke a perpetual license from a machine:. Select a perpetual license. The software displays the license keys that correspond to the selected license.
The machine that the key is assigned to is shown in the Assigned to column. Select the license key to revoke. Click Revoke. Confirm your decision. The revoked key will remain in the license keys list. It can be assigned to another machine. To revoke a subscription license from a machine:. Select a subscription license. The software displays machines that the selected license is already assigned to.
Select the machine to revoke the license from. Click Revoke license. Please refer to this page for more information. Depending on the currently installed version, either you can upgrade directly or you may need to uninstall the current version first. Please note that Cloud deployment is available only for subscription licenses.
You’ll find detailed information on customizing installation settings on this page. For more information, refer to backup plan cheat sheet.
Acronis Cyber Protect lets you back up data to various physical storage:. A protection plan can be applied to multiple machines at the time of its creation, or later. Select the machines that you want to protect. Click Protect , and then click Create plan. You will see the protection plan with the default settings [Optional] To modify the protection plan name, click on the pencil icon next to the name. When ready, click Create. Click Protect. If a common protection plan is already applied to the selected machines, click Add plan.
Select a protection plan to apply. Click Apply. The following schemes can be set: Always incremental single-file Always full Weekly full, Daily incremental GFS Monthly full, Weekly differential, Daily incremental Custom Please refer to this page for more information about scheduling options.
You can choose one of the following options to specify how long to keep backups created by the backup plan: By backup age default By number of backups By total size of backups not available with the Always incremental backup scheme, or when backing up to the cloud storage, an SFTP server, or a tape device Keep backups indefinitely Refer to this page for detailed instructions on how to apply the retention rules.
For additional protection of the application data, enable Application backup in the parameters of the backup plan: Application-aware disk-level backup is available for physical machines, ESXi virtual machines and Hyper-V virtual machines. For SQL Server: The account must be a member of the Backup Operators or Administrators group on the machine, and a member of the sysadmin role on each of the instances that you are going to back up. For Exchange Server: Exchange The account must be a member of the Administrators group on the machine, and a member of the Exchange Organization Administrators role group.
For Active Directory: The account must be a domain administrator. Yes, the backup file name can be changed. Please refer to this page for detailed information on backup file name option. Acronis Cyber Protect offers Physical Data Shipping service that allows you to send your initial full system backups to Acronis Cloud Storage on a hard drive.
Yes, databases are fully accessible during backup. Acronis Cyber Protect creates a snapshot of entire database or entire disk with database, depending on the type of backup selected and then records the contents of the snapshot inside the backup archive.
Thus the database is available during the entire backup process, as all the data is copied during snapshot and Acronis Cyber Protect no longer requires access to the database. The software displays the connected removable media.
Acronis disk director key 12 free.Frequently asked questions
Without activation the fully functional product works for 30 days. If you do not activate it during that period, all the program functions become unavailable except the recovery. You can activate Acronis True Image either on your computer or from another computer, if your computer is not connected to the Internet. If you have an upgrade serial number, Acronis True Image will prompt you to enter serial number for earlier version of the product in the second field:.
If your computer is connected to the Internet, the product will be activated automatically when you sign in to your Acronis account. If your serial number is not registered yet, you will be prompted to enter the serial number manually. Click Enter serial number , type in or paste the serial number, and click Activate. If the license cannot be activated online for any reason, follow instructions below to activate the license using the offline method:.
The program will generate an installation code. It uniquely identifies the computer where Acronis True Image is installed and what license key was specified. Save your installation code to a file by clicking the Save to file button, and specify a removable media as the file location for example, a USB flash drive.
You can also write down this code on a piece of paper. Click Load from file and select the file, saved in the previous step or type in the installation code if you chose to write it down The Installation code field will be populated with the value from the file.
Click Get activation code to proceed : You will be shown the activation code not to be confused with serial number or installation code.
Click Save to file and save it to a removable disk. You can also copy the activation code to the clipboard and save it anywhere else, or write it down on a paper. Back on the computer with Acronis True Image awaiting activation, click the Load from file button and select the file with the activation code from the previous step. You can also type the activation code manually into the box from the piece of paper. Windows Mac Click Activate to verify the activation code : Windows Mac The message The product has been successfully activated is displayed, indicating the procedure is completed successfully: Windows Mac Upgrade from an earlier paid version If you purchased an upgrade version of Acronis True Image , after you specify the license key for the upgrade version, the product will prompt you to enter another serial number.
In the second field please enter a serial number for an earlier version of Acronis True Image. After providing both keys, follow the usual online or offline activation procedure. If an earlier version of Acronis product is already installed in your system, installation assistant will recognize serial number from the earlier version automatically and will not prompt you to enter a second serial number.
Verify the network connection to Acronis servers. Skip to main content. Applies to: Acronis True Image Last update: Contents Online activation Offline activation Upgrade from an earlier paid version Upgrade from a free OEM version Troubleshooting Provide serial number After installation, Acronis True Image will ask you to provide a serial number: If you have an upgrade serial number, Acronis True Image will prompt you to enter serial number for earlier version of the product in the second field: Online activation method If your computer is connected to the Internet, the product will be activated automatically when you sign in to your Acronis account.
Acronis True Image Subscriptions are registered in the account automatically upon purchase. The account used for registration is tied to the email specified during purchase. Sign in to your account in Acronis True Image interface and the product will be activated automatically. Acronis True Image 1-Time Purchase Licenses perpetual licenses can be registered in the account or in the product interface, as described below.
Offline activation method If the license cannot be activated online for any reason, follow instructions below to activate the license using the offline method: Windows Mac Acronis True Image Essential, Advanced and Premium cannot be activated offline. Boxed versions of Acronis True Image are shipped with a 14 to 16 digits activation key instead of a full 64 digits product serial number.
You need to obtain the full 64 digits serial number before activating the product. On the machine with Internet connection, follow these steps.
Then provide the full serial number in your Acronis True Image and activate the product as described below. Was this article helpful?